Livet er vidunderligt RSS 2.0
# Sunday, May 15, 2011

How to use Picture in Picture with Avid Studio

Adding a Picture-In-Picture (PIP) effect is a little different in Avid Studio than in previous Pinnacle Studio versions. The PIP effect is found in the Effects Editor. To access it either double-click on the clip that you want to apply the effect to or right-click on the clip and select “Open Effect Editor”.

Note: Remember Avid Studio uses a top-down overlay priority system. So track 1 overlays track 2, etc. Make sure to add the PIP effect to the track that you want on top.

Once in the Effects Editor select 2D-3D. Then select Studio PIP, or if you want a PIP window with a different shape you can select MultiShape PIP.

Once you select the PIP effect you then have the option to adjust the settings. The Default is a Top Right position PIP window with no shadow. There are other presets to change the PIP location such as Top Left, Bottom Left, Centered, etc. Additionally you can change the following settings:

1. Position

2. Size

3. Cropping

4. Video (Transparency)

5. Border

6. Shadow

As with other Effects the Picture-In-Picture effect is keyframable to allow for maximum utility.

Sunday, May 15, 2011 3:38:36 PM (Romance Daylight Time, UTC+02:00)  #    Comments [0] - Trackback
Video redigering
# Tuesday, May 03, 2011

For more information regarding AVID Studio, read the information below.

All this content is summarised on the website: All about AVID Studio.

There is a bug in Avid Studio software that enables the Red Giants plugins does not show if the program is installed on the Danish, Norwegian, Swedish or Finnish.

At present there is no solution other than to install the program in English.

Tuesday, May 03, 2011 6:46:49 PM (Romance Daylight Time, UTC+02:00)  #    Comments [1] - Trackback
Video redigering
# Friday, February 11, 2011

After working with Privotal Tacker for some time the demands raised and a new tool was need, now I am using VersionOne that at the moment covers it all.


Privotal Tacker was excellent as starter of and agile project.

Pivotal Tracker

To manage your development process, use Pivotal Tracker, an agile planning tool that can be used on all of your projects. 

Friday, February 11, 2011 3:58:40 PM (Romance Standard Time, UTC+01:00)  #    Comments [0] - Trackback
Software Development
# Wednesday, February 09, 2011
# Saturday, January 29, 2011
Married with one from china, in Denmark or China ?
Saturday, January 29, 2011 3:24:15 PM (Romance Standard Time, UTC+01:00)  #    Comments [0] - Trackback
# Sunday, October 31, 2010

I had the same problem and got it to work.

I first did the following:-

>Start>Settings>Control Panel>Administrative Tools>Services<

and stopp the ‘Nero Update Service’.
(This service might be renamed on some systems to

Once the service is stopped open your internet browser and do the following:

1.) –> enter to the address field
2.) –> refresh the Web Browser by holding the “SHIFT key” and using the “refresh page” function
3.) –> enter to the address field
4.) –> again refresh the Web Browser by holding the “SHIFT key” and using the “refresh page” function
5.) –> restart Nero ControlCenter and check for updates again

The update should work as far as updates are available now.

Used internet explorer to to it (probably not important that it has to be that, just that sometime I've had to use it for things so tried it for that)

It allowed me to do a check for updates again.

I disabled the backitup agent

choose to update the control center by itself first. It installed. rebooted the computer.

Rechecked for updates, (disabled the agent again, as I forgot to stop it from launching at start up)

select backitup and let it go for a few minutes (about 2-3) and it downloads.

Sunday, October 31, 2010 12:24:19 PM (Romance Standard Time, UTC+01:00)  #    Comments [0] - Trackback
Software Development
# Wednesday, August 25, 2010


// An STA thread will be created and used to run
// all the tests in the assembly


// TestFixture requiring a separate thread
[TestFixture, RequiresSTA]
public class FixtureRequiringSTA
  // An STA thread will be created and all
  // tests in the fixture will run on it
  // unless the containing assembly is
  // already running on an STA Thread

public class AnotherFixture
  [Test, RequiresSTA]
  public void TestRequiringSTA()
    // A separate thread will be created for this test
// unless the containing fixture is already running
// in the STA.

Wednesday, August 25, 2010 11:46:10 AM (Romance Daylight Time, UTC+02:00)  #    Comments [0] - Trackback
Software Development
# Friday, July 16, 2010

An introduction to BDD can be found here.
A great tool for making BDD can be found at SpecFlow.

More will come later. 

Friday, July 16, 2010 8:22:18 AM (Romance Daylight Time, UTC+02:00)  #    Comments [0] - Trackback
Link | Software Development
# Monday, July 05, 2010
<Style x:Key="HorizontalRadioButtonList" TargetType="{x:Type ListBox}">
    <Setter Property="Background" Value="Transparent"/>
    <Setter Property="ItemsPanel">
        <VirtualizingStackPanel Background="Transparent" Orientation="Horizontal"/>
    <Setter Property="ItemContainerStyle">
        <Style TargetType="{x:Type ListBoxItem}" >
        <Setter Property="Margin" Value="5" />
        <Setter Property="Template">
            <ControlTemplate TargetType="{x:Type ListBoxItem}">
                <Border BorderThickness="0" Background="Transparent">
                <RadioButton Focusable="False"
                        IsChecked="{TemplateBinding IsSelected}">
                    <ContentPresenter />
    <Setter Property="Control.Template">
        <ControlTemplate TargetType="{x:Type ListBox}">
        <Border BorderThickness="0" Padding="0" BorderBrush="Transparent" 
Background="Transparent" Name="Bd" SnapsToDevicePixels="True">          <ItemsPresenter SnapsToDevicePixels="{TemplateBinding
/>         </Border>      </ControlTemplate>     </Setter.Value> </Setter> </Style>
<ListBox Name="lbAchieved"
      Style="{StaticResource HorizontalRadioButtonList}"
      SelectedValue="{Binding Path=IsAchieved, Converter={StaticResource 
     SelectedValuePath="Tag"> <ListBoxItem Tag="True">Yes</ListBoxItem> <ListBoxItem Tag="False">No</ListBoxItem> </ListBox>
Monday, July 05, 2010 11:05:16 PM (Romance Daylight Time, UTC+02:00)  #    Comments [0] - Trackback
Software Development
# Wednesday, June 30, 2010

Now a new version for VS 2010 Snippet editor.

Export code as Code Snippet - Addin for Visual Studio 2008/2010 RC

The Snippet Designer is a plugin which enhances the Visual Studio 2008 IDE to allow a richer and more productive code snippet experience. Snippet Design


Wednesday, June 30, 2010 8:54:07 AM (Romance Daylight Time, UTC+02:00)  #    Comments [0] - Trackback
Software Development
<May 2011>
About the author/Disclaimer

The opinions expressed herein are my own personal opinions and do not represent my employer's view in any way.

© Copyright 2020
Christian R. Glinnum
Sign In
Total Posts: 128
This Year: 0
This Month: 0
This Week: 0
Comments: 16
All Content © 2020, Christian R. Glinnum
DasBlog theme 'Business' created by Christoph De Baene (delarou)